Installing The Battery, Storage Card, And Sim Card; Battery - HTC Snap User Manual

Hide thumbs Also See for Snap:

Table of Contents

1.2 Installing the Battery, Storage Card, and SIM Card

You need to remove the back cover before you can install the battery, storage card, and a SIM card (optional) on

your phone. Also, make sure to always turn off the power before installing or replacing a SIM card and battery.

To remove the back cover

Hold the phone securely with both hands and the front facing

down.

Push the back cover up with your thumb until it disengages from

the phone and then slide it up to remove.

Your phone comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-

specified original batteries and accessories. Battery performance depends on many factors, including but not

limited to your wireless service provider's network configuration, signal strength, and the temperature of the

environment. For battery life estimates, see "Specifications" in the Appendix.

WARNING! To reduce risk of fire or burns:

• Do not attempt to open, disassemble, or service the battery pack.

• Do not crush, puncture, shorten external contacts, or dispose of in fire or water.

• Do not expose to temperatures above 140˚F (60˚C).

• Replace only with the battery pack designated for this product.

• Recycle or dispose of used battery as stipulated by local regulation.

To install the battery

Remove the back cover.

Align the exposed metal contacts on

the edge of the battery with the battery

connectors inside the battery compartment.

Insert the contacts side of the battery first

and then gently push the battery into place.

Replace the back cover.

Battery connectors

Getting Started 19

Table of Contents