Editing A Program - HP 33s User Manual

To see the line in the program containing the error–causing instruction, press
£
. The program will have stopped at that point, (For instance, it might be a
instruction, which caused an illegal division by zero.)

Editing a Program

You can modify a program in program memory by inserting, deleting, and editing
program lines. If a program line contains an equation, you can edit the
equation — if any other program line requires even a minor change, you must
delete the old line and insert a new one.
To delete a program line:
1. Select the relevant program or routine (
¹ £
entry (
must be changed. Hold the cursor key down to continue scrolling. (If you know
the line number you want, pressing
program pointer there.)
2. Delete the line you want to change — if it contains an equation, press
¡
{  }; otherwise, press
line. (If you are deleting more than one consecutive program line, start with the
last line in the group.)
3. Key in the new instruction, if any. This replaces the one you deleted.
4. Exit program entry (
To insert a program line:
1. Locate and display the program line that is before the spot where you would
like to insert a line.
2. Key in the new instruction; it is inserted after the currently displayed line.
For example, if you wanted to insert a new line between lines A0004 and A0005
of a program, you would first display line A0004, then key in the instruction or
instructions. Subsequent program lines, starting with the original line A0005, are
moved down and renumbered accordingly.
To edit an equation in a program line:
1. Locate and display the program line containing the equation.
12–18
Simple Programming
Ø
), and press or
¹ r Ë
~
. The pointer then moves to the preceding
Å ¹ £
or
¹ r
label ), activate program
×
to locate the program line that
label nnnn moves the
).
¹
¹