To edit an equation you're typing:
~
1. Press
repeatedly until you delete the unwanted number or function.
If you're typing a decimal number and the "_" digit–entry cursor is on,
deletes only the rightmost character. If you delete all characters in the number,
the calculator switches back to the " " equation–entry cursor.
If the " " equation–entry cursor is on, pressing
number or function.
2. Retype the rest of the equation.
Ï
3. Press
To edit a saved equation:
1. Display the desired equation. (See "Displaying and Selecting Equations"
above.)
~
2. Press
(once only) to start editing the equation. The " " equation–entry
cursor appears at the end of the equation. Nothing is deleted from the
equation.
~
3. Use
to edit the equation as described above.
Ï
4. Press
replacing the previous version.
To clear an equation you're typing:
¹ ¡
Press
the equation list.
To clear a saved equation:
1. Display the desired equation. (See "Displaying and Selecting Equations"
above.)
¹ ¡
2. Press
To clear all equations, clear them one at a time: scroll through the equation list until
you come to , press
each equation is displayed until you see .
Example:
Editing an Equation.
Remove 25 in the equation from the previous example.
6–8
Entering and Evaluating Equations
Å
(or
) to save the equation in the equation list.
Å
(or
) to save the edited equation in the equation list,
then press { }. The display goes back to the previous entry in
. The display shows the previous entry in the equation list.
×
~
deletes the entire rightmost
¹ ¡
, then press
~
repeatedly as