9. TRANSPORTING
Ttailering
STEERING FRICTION
When trailering or transporting the boat
with the motor attached, it is recom-
mended that the motor remain in the
normal run position. Tighten the steering
friction adjuster securely to stop the
motor's side to side movement.
If there is insufficient
road clearance
with the motor in the normal run po-
sition, then trailer the motor in the
tilted position using a motor support
bar (refer to your motor support bar
manufacturer's instructions) or re-
move the motor from the boat.
Horizontal Transport
I
I
CASE PROTECTORS
Before removing the motor from the
boat, drain the carburetors. Follow
the carburetor drain procedure on
page 87.
Always rest the motor on the case
protectors and be sure to protect it
from impact and damage.
64