Honda Marine BF25A Owner's Manual page 56

7. OPERATION
ENGINECOVERGRIP
TILT~EVER
3. Put the tilt lever in the TILT posi-
tion. Use the engine cover grip and
raise the motor to either the 30", 45"
or 75" tilt position.
With the motor tilted up:
l
Operate the boat at low speed.
l
Do not operate in reverse.
l
Monitor the cooling system
indicator for water discharge. Be
sure
that the motor is not tilted so
high that the water intakes are out
of the water.
54
75" (when mooring)
49
30' (when cruising in
shallow water)
4. To return the motor to the normal
RUN position, move the tilt lever
away from your until it stops. Tilt
the motor up slightly, then lower the
motor slowly until it locks with the
transom angle adjusting rod. During
cruising, the motor must always be
in the normal run position.
Reverse Operation:
The tilt lever must be in the RUN
position with the motor locked to
transom angle adjusting rod. If the
motor is operated in reverse with the
tilt lever in the TILT position and/or
the motor is in one of the three tilt
angle positions, the motor is free to
tilt up.