Table of Contents
Advertisement
FUNCTIONS
Digital Speedometer includes the following functions:
• Speedometer
• Fuel Level Meter
• Volt Meter
• Tripmeter
• Fuel Integration Meter
• Fuel Economy Meter
• Fuel Flow Meter
• Water Separator Indicator
The indicated speed can be displayed in three ways, "mph",
"km/h" or "knots" according to your preference. Please see your
authorized Honda marine dealer in order to change this setting.
When selecting "knots", the "miles" displayed will be "nautical
miles".
2
The displays are common
(
)
selected by pressing
the Mode switch
Display Check
The digital speedometer is turned ON when the ignition key of
the outboard motor is moved to the ON position. After the
ignition is turned ON, the meter will show all the displays for
about 2 seconds, then returned to the normal display.
If the displays blink after the ignition key was moved to the ON
position, turn the ignition key OFF without operating the digital
speedometer. Failure to turn the ignition key OFF will lead to
an erroneous display.
Consult your authorized Honda marine dealer for advice if the
digital meter fails to work properly.
SPEEDOMETER
WATER SEPARATOR
INDICATOR
VOLT METER
(BATT)
TRIPMETER
(TRIP)
FUEL INTEGRATION
METER (TTL)
SET SWITCH
FUEL LEVEL METER
FUEL FLOW
METER (FLOW)
FUEL ECONOMY
METER (ECO)
MODE SWITCH
Advertisement
Table of Contents
