Engine Oil Change - Honda BF5A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR

Engine Oil Change

An engine oil evacuation device may
be used to remove the engine oil.
Drain the used oil into a suitable
container while the engine is warm.
Warm oil drains quickly and
completely.
1. Unlock and remove the engine
cover (p. 43 ).
44
DRAIN BOLT
2. Remove the oil filler cap, and
remove the engine oil drain plug
and washer.
3. Allow the used oil to drain
completely, then reinstall the
engine oil drain plug and a new
washer, and tighten it securely.
Improper disposal of engine oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down a
drain.
4. With the outboard motor in a
vertical position, fill to the upper
limit mark on the dipstick (p.
with the recommended oil.
5. Install the oil filler cap and tighten
it securely.
6. Install and lock the engine cover.
43 )