Honda Marine BF25A Owner's Manual page 31

INSTALLATION
Plug and Receptacle
(models without electric starter)
. .
DC RECEPTACLE
-&
L,
fl-
-
TO ACCESSORI:
i I \ I
ES
CHARGING CORD
\
To prepare the outboard motor for
connection to a battery, pull the cover
out of the DC receptacle, connect
your battery charging wires to the
receptacle. Attach the connected DC
receptacle on the holder on the tiller
arm.
The receptacle is provided with a
cover, which should be attached
when the plug is removed, in order to
keep the receptacle clean and dry.
Battery
Minimum Requirements
12V-70AH
Battery Terminals
(
+
)
TERMINAL
BLACK or GREEN
Connect the positive
(+)
battery cable
to the positive (+) battery terminal,
then connect the negative (-) battery
cable to the negative
(-)
battery
terminal.
The negative (-) battery cable should
always be removed from the battery
when connecting or disconnecting
the positive
(+)
battery cable, so tools
cannot cause a short circuit if they
touch a grounded part while being
used on the positive
(+)
battery
terminal fitting.
29