Changing A Flat Tire - Honda Pilot Owner's Manual

2011
Hide thumbs Also See for Pilot:
Table of Contents

Advertisement

If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park. Apply the
parking brake.
CARGO AREA
FLOOR
SPARE TIRE
2.
Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
3.
Open the tailgate.
2011 Pilot

Changing a Flat Tire

JACK
TOOLS
4.
Push the rear edge of the handle
to raise the handle loop and pull up
the loop to raise the cargo area
floor.
Remove the cargo area floor.
CONTINUED
509

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 pilot

Table of Contents