Honda Pilot Owner's Manual page 462

Maintenance Information
To change the information display
from the engine oil life display to the
odometer or the trip meter, press
and release the select/reset knob.
When the engine oil life is 0 percent
or negative distance traveled, the
maintenance information indicator
( ) remains on even if you
change the information display.
Immediately have the service
performed, and make sure to reset
the display as described as follows.
458
Maintenance Main Items and Sub
Items
On vehicles without navigation system
MAINTENANCE SUB ITEM(S)
MAINTENANCE MAIN ITEM
U.S. model is shown.
All maintenance items displayed on
the information display are in code.
For an explanation of these
maintenance codes, see page
2011 Pilot
Resetting the Engine Oil Life
Display
On vehicles without navigation system
Your dealer will reset the display
after completing the required
maintenance service. You will see
''OIL LIFE 100%'' on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance information as
follows:
1. Turn the ignition switch to the ON
(II) position.
469 . 2. Press the select/reset knob
repeatedly until the engine oil life
is displayed.