Maintenance Maintenance And Inspection - Hitachi NT 65MA4 Instruction And Safety Manual

English
NOTE
The information contained in this Manual is designed to assist you in the safe maintenance
of the Nailer.
Some illustrations in this Manual may show details or attachments that diff er from those
on your own Nailer.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (pages 4 –
6).
● Disconnect air hose and remove all
nails from Nailer when:
1) doing
inspection; and
2) clearing a jam.
1. Clearing a jam
Remove a jammed nail in the following
order:
1 DISCONNECT AIR HOSE.
2 Remove all nails.
3 Release the lock lever and open guide
plate (A).
Lock lever
3
Guide Plate (A)
4 Remove the jammed nail with a slotted-
head screwdriver.
4
18
MAINTENANCE
WARNING
maintenance
Disconnect
1
air hose
5 Close guide plate (A) and latch.
6 In case of frequent jam, contact a
Hitachi authorized service center.
2. Inspecting the magazine.
1 DISCONNECT AIR HOSE.
2 Clean the magazine. Remove dust
which may have accumulated in the
magazine.
3 Lubricate the nail rail with Hitachi
and
pneumatic tool lubricant.
Nail Rail
3. Storing
○ When not in use for an extended period,
apply a thin coat of the lubricant to the steel
parts to avoid rust.
○ Do not store the Nailer in a cold weather
environment. Keep the Nailer in a warm
area.
○ When not in use, the Nailer should be stored
in a warm and dry place.
Keep out of reach children.
4. WARNING LABEL
Change the WARNING LABEL if missing or
damaged.
A new WARNING LABEL is available from
a Hitachi authorized service center.
3
Disconnect air
1
hose