Important Safety Instructions For Use Of The Impact Wrench; Replacement Parts; Polarized Plugs - Hitachi WH 14 Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS
FOR USE OF THE IMPACT WRENCH
WARNING:
1. When working in high places, check there is nobody below. During operation, take care
not to catch or tighten the cord accidentally.
2. Use the earplugs if using for a long time use.
3. Switch the reversing switch only after the motor is stopped when it is necessary to change
the direction of the rotation.
4. Use a step up transformer when a long extension cable is used.
5. Confirm the tightening torque by a torque wrench before use in order to ascertain the
correct tightening torque to be used.
6. Attach the hex. socket securely onto the anvil. If the hex. socket is insufficiently secured,
it may drop out and cause an accident. For hex. socket attachment refer to "PRIOR TO
OPERATION" on page 13.
7. Confirm whether the socket has any crack in it.

REPLACEMENT PARTS

When servicing use only identical replacement parts.
Repairs should be conducted only by a Hitachi authorized service center.

POLARIZED PLUGS

To reduce the risk of electrick shock, this equipment has a polarized plug (one blade is wider
than the other).
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
Death or serious bodily injury could result from improper or unsafe use
of the impact wrench. To avoid these risks, follow these basic safety
instructions:
English
7