HANNspree AD32U User Manual page 17

Screen mode
Auto format
Advanced video
VGA
(only shown on VGA source)
Active Contrast
Note: The options available on the OSD may vary depending on the input signal source.
Sound
Option
Sound preset
Balance
Audio delay
Wide stereo
Auto volume control
Sound type
Type
Visually impaired
(only available when Type is set
to Visually impaired)
Wide
Zoom 2
Enable/disable the aspect ratio selection automatically
(On/Off).
Noise reduction
Light sensor
Auto adjust (Sychronize the display automatically).
H. Position
V. Position
Phase
Clock
Enable/disable Active Contrast function (Automatic backlight
control function based on average luminance of input pattern)
(On/Off).
* If Active Contrast was set as On, the ECO Dynamic back light &
Light sensor function will be disabled.
Description
Select a preset audio option optimized for different sounding
conditions (Rock/Pop/Live/Dance/Techno/Classic/Soft/Personal/
Off).
Adjust the sound balance between the left and right speakers
(-50~50).
Adjust the audio delay setting in millisecond (0~1000).
* This option is only available for digital channels.
Enable/disable the wide stereo feature (On/Off).
Select to automatically adjust the volume.
* This option will only appear when the input source is TV.
Select the sound type setting (Stereo/Dual1/Dual2/Mono).
Select the sound type mode (Normal/Visually impaired).
Speaker
Stretch
Zoom
Reduce the noise level
(High/Off/Low).
Enable/disable the light sensor to
detect the current level of visible light in
the surrounding environment
(On/Off).
Adjust the position of the image left and
right (0~100).
Adjust the position of the image up and
down (0~100).
Adjust to reduce horizontal noise
(0~31).
Adjust to reduce vertical noise (0~255).
Turn on or off the speaker (On/Off).
17