Adjusting the ECO Dynamic Backlight
1
Press Menu on the remote control to display the main menu.
2
Select Picture > ECO Dynamic back light.
3
Press t/u to select the desired setting. At this time, the Picture preset option under Picture will be
set at Personal synchronically.
4
Press Exit to close the menu.
Using the PAP Function
1
Press Menu on the remote control to display the
main menu.
2
Select Setup > PAP and press OK/u to enter its
submenu.
3
To activate the PAP function, press t/u to select
On.
4
Press t/u to set the position of the TV window.
5
Press t/u to toggle the focus window.
6
When focus is on TV window, the digit buttons and P
windows, P
/P
Customizing the Input Settings
1
Press Menu on the remote control to display the main menu.
2
Select TV > Input settings and press OK/u to enter its submenu.
3
Press p/q to select a connector your equipment is connected to.
4
Press t/u to select the device type that is attached to this connector.
5
Press Menu to return to the TV menu.
Note:
•
After configuring the above setting, the selected source label will be displayed after the name selected in the
source list.
Changing Your Location
1
Press Menu on the remote control to display the main menu.
2
Select Setup > Location.
3
Press t/u to select your location (Shop or Home).
4
Press Exit to close the menu.
Resetting to Factory Default Settings
1
Press Menu on the remote control to display the main menu.
2
Select TV > Reset and press OK/u to enter its submenu.
3
Use the digit buttons to enter the password.
4
Press ◄/► to select OK and press OK to confirm.
5
The Initial setup menu appears. Follow the on-screen instructions.
Note:
•
The default password is 1234.
14
can change available extension sources.
Focus window position indicator
/P
work in TV. When focus is on other