Haier Unitary smart series Service Manual page 114

INSTRUCTIONS TO INSTALLATION
BE SURE TO READ THESE INSTRUCTIONS CAREFULLY BEFORE BEGINNING INSTALLATION. FAILURE TO
FOLLOW THESE INSTRUCTIONS COULD CAUSE SERIOUS INJURY OR DEATH, EQUIPMENT MALFUNCTION
AND/OR PROPERTY DAMAGE.
BE SURE TO READ INSTALLATION MANUAL FOR INDOOR UNIT WITH THIS MANUAL.
1.Accessories
Confirm accessories shown below are attached in the bag with this Installation manual.
Accessories Delivered with Your Air Conditioner
Please check if your unit is delivered with the following accessories.
No.
1
Remote
Name
controller
and
shape
Qty
1
Install the indoor unit where the weight of the unit can be supported.
Install the indoor unit where the heat source and steam source are not close and the unit inlet
and outlet are not blocked.
Install the indoor unit where the drainage is easy and the outdoor unit can be easily
connected.
Install the indoor unit where its cold air and hot air can be easily sent to all the comers of the
room.
Install the indoor unit where the power socket is near and there is sufficient space around the
indoor unit.
Install the indoor unit where there is no T.V set, radio set, and wireless appliance underneath,
and the sunlight lamp is over one meter away.
If the remote controller is installed on the wall, the indoor unit shall be ensured to receive the
signal while the sunlight lamp is on.
Method for Cutting and Expanding Pipes.
When the pipe is too long or the mouth is damaged, the pipe needs to cut or expanded.
1.cutting hose
A
Hose Expander
Correct Not Correct
Tilting
2 3
Mounting plate
Batteries
2 1
2.Removing burr
cracks on expanded mouth burr
WARNING
!
5
4
x 4 25 screw Expansion
Drain hose
bushing
6 6
1
Indoor Unit
3.Put on nut
Expansion Size
Hose dia.
6.35 mm(1/4)
12.7 mm(1/2)
-114-
6 7 8
Cement
Piping hole
steel nail
cover
8 1
4.Expand Hose
Size (mm)A
0.8-1.5
1.0-2.0
incomplete too long
9 10
Screw Plastic
supporting
plate
2 1