Installation; Operation Instructions; Before Use; Operating Instructions - Haier HYC-260-360 Operation Manual

1.Temperature display
Preset temperature of the appliance is 5 2 .
Preset warning point of high temperature is 8 ,and of low temperature is 2 .
Caution:Displayed temperature is detected by test bottles for upper and lower sections of
the appliance, and does not always remain at 5 .The information displayed by the snesor
indicates the average temperature.
Temperature adjusting:
Press and hold both SENSOR SELECT button and CALIB CANCEL button for more than 3s until
original setting starts flashing to indicate that it enters temperature setting mode. With each press
of CALIB CANCEL button, temperature setting increases 0.1
is defaulted as 8 . If press again, it returns to lower limit, which is defaulted as 2 . It repeats the
above cycle. When it reaches your desired temperature, if you don't press the button within 5s,
the temperature setting will be saved and it automatically quits the temperature setting mode (the
temperature setting range programmed at factory is 2 - 8 ). The display returns to display inside
sensor temperature or average temperature before setting is made (not flashing).
until reaching upper limit, which