Preparation For Use; Ac Adaptor Operation; Battery Power Operation - Grundig GTB59 Instruction Manual

GTB59

Preparation For Use

Carefully remove your GTB59 from the box. You may wish to store the packaging for future use.
In the Box
Inside the box you will find:

GTB59 Transistor Box 59 (Main Unit)

Power Adaptor

User Guide

Letter of Authenticity

AC ADAPTOR OPERATION

Connect the AC Power Cord to your AC household mains outlet and switch on the mains power
supply. Make sure the voltage is compatible.
Note: Disconnect the Power Cord from the mains when not in use.

BATTERY POWER OPERATION

1. Remove the AC Power Cord from the power supply and the unit for battery operation.
2. Open the battery compartment lid.
3. Install 4 x UM-2 / C size batteries (not included). Refer to the polarity diagram on the
battery compartment. Match the (+) and (-) marks on the diagram to the (+) and (-) marks
on the batteries.
4. Replace the lid.
Note: Batteries should be removed from the compartment if the unit is not to be used for a
long period of time.
Flat batteries should be removed from the unit to avoid leakage.
5