Shaping Small Stock
Figure 46
Always use hold-downs or featherboards
when shaping small or narrow stock. These
devices will keep your hands away from the
spinning cutterhead and support stock suf-
ficiently to allow a safe and effective cut.
Failure to follow this warning may lead to
severe personal injury.
To make a zero-clearance fence:
1.
2.
3.
4.
5.
6.
Figure 46
Step 2
Figure 46.
Rub Collars
Rub collars may be used in any of the follow-
ing positions:
1.
Rub collar below the cutter:
Figure 47,
We DO NOT recommend using
the rub collar in this position.
Not
Recommended!
Figure 47.