Grandstream Networks GXV3500 User Manual page 11

Connect to the Device Using a Static IP.
If the device does not get a response from the DHCP server after 3 minutes, it can be
accessed by the default IP 192.168.1.168.
1. Connect your PC to the same network as the GXV3500.
2. Configure the IP address of your PC to: 192.168.1.XXX (1<XXX<255) and configure
the subnet mask to 255.255.255.0.
3. Make sure that the device is turned on and connected to the network.
4. Start Internet Explorer on your computer.
5. Enter 192.168.1.168 in the address bar of the browser.
6. Enter the administrator user name and password to access the Web Configuration
Interface
7. The default user name and password are both set to admin.
8. Once you log into the GXV3500 web interface, the device will indicate that you need
to install or update the video plug in.
9. Save the VideoPlugine.exe file and run it on your computer. Then restart Internet
Explorer. You should get a confirmation message regarding the installation of the plug
in.
10. Once the installation of the plug in is completed, you will see the web page shown in
the screenshot on the next page. Click on the play button to view the video feed.
Firmware 1.0.1.38
Grandstream Networks, Inc. 08/2011
GXV3500 Digital Video Encoder/Decoder
Page 11 of 32