Table of Contents
Advertisement
2 Move the cursor right to change the speaker distance for the highlighted speaker.
3 Move the cursor (up/down) to change the distance
- When you change the distance settings of the front left or front right speakers, all the other speaker distances change relative to it.
- Front left/right speaker distances can the set from 30cm to 9m in 10cm increments.
- The centre speaker and subwoofer can be set from -2m to +2m relative to the front left/right speakers.
- Surround left/right speakers can be set from -6m to +2m relative to the front left/right speakers.
4 Move the cursor left to go back to the speaker list if you want to modify another speaker, or press ENTER to exit the
Speaker Distance screen.
Channel Level
• Default setting: Fix
You only need to make this setting if you connected this player to your amplifier using the 6 channel analog outputs.
This setting does not affect digital audio output.
When set to Fix, the level of each of the 6 channel analog outputs is fixed. Choose Variable if you want to adjust the relative levels
to balance the surround sound better for your listening room.
You can set the individual channel levels between –6dB and +6dB using the test tone output as a guide to set the correct levels.
Adjust the levels until the output level from all channels sounds the same from your usual listening position.
Automatic: Select Auto to start the test tone output.
As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the cursor up/down buttons to adjust the
channel output level of the current speaker.
Note that the test tone is not output from the subwoofer. Press (cursor left) to exit the test tone sequence, or ENTER to save the
settings and exit the channel level setting screen.
Manual: Use the cursor up/down buttons to select a speaker. Press (cursor right) then use the cursor up/down buttons to set the
channel output level.
To turn the test tone on/off for an individual speaker, press (cursor right). The test tone continues playing even when you select a
different speaker.
Press ENTER to save the settings and exit the channel level setting screen.
48
Advertisement
Table of Contents
