Table of Contents
Advertisement
- Depending on the disc, normal playback may automatically resume when a new chapter is reached.
- For DVD-Audio discs featuring browsable pictures (see below), press Reverse/Forward to view the previous/next picture.
Frame advance/frame reverse
You can advance or back up DVD-Video or DVD-RW discs frame-by-frame. With Video CD/Super VCDs, you can only use frame
advance.
1 - During playback, press (pause).
2 - Press Reverse or Forward buttons to reverse or advance a frame at a time.
3 - To resume normal playback, press (play).
Notes: The picture quality when using frame reverse is not as good as frame advance.
- Depending on the disc, normal playback may automatically resume when a new chapter is reached.
- When changing direction of a DVD Video disc, the picture may 'move' in an unexpected way. This is not a malfunction.
- For DVD-Audio discs featuring browsable pictures (see below), press Reverse/Forward view the previous/next picture.
Looping a section of a disc
The A-B Repeat function allows you to specify two points (A and B) within a track (DVD-Audio, CD and Video CD) or title (DVDVideo
and DVD-RW) that form a loop which is played over and over.
Note: A-B Repeat is not available with SACDs, MP3s, Super VCDs, Video CD in PBC mode, or while a DVD disc menu is displayed.
1 - During playback, press PLAY MODE and select 'A-B Repeat' from the list of functions on the left.
2 - Press ENTER on 'A(Start Point)' to set the loop start point.
3 - Press ENTER on 'B(End Point)' to set the loop end point.
After pressing ENTER, playback jumps back to the start point and plays the loop.
4 - To resume normal playback, press CLEAR or select 'Off' from the menu.
26
Advertisement
Table of Contents
