Power Supply Voltage Selection; Choice Of Player Location; Power Connection - Goldmund EIDOS REFERENCE User Manual

Universal player
Hide thumbs Also See for EIDOS REFERENCE:
Table of Contents

Advertisement

ATTENTION!:
If you need to return the player to the factory or to your local representative for a warranty repair, please note that
it must be repackaged in the original packing. This packaging has been designed specifically to protect the
EIDOS REFERENCE. Use of alternative packaging is likely to result in damage, invalidating warranty.

3. POWER SUPPLY VOLTAGE SELECTION

The power supply of your unit has been adjusted to operate with the AC voltage of your area. Check on the back panel of the unit if in
any doubt. If you move after purchasing the Universal player to an area using different mains voltage, do not forget to switch the back
panel selector to the new voltage of your area. The unit can operate at 50 or 60 Hz mains.

4. CHOICE OF PLAYER LOCATION

Due to the specific quality of its Goldmund "Mechanical Grounding" construction, the Goldmund EIDOS REFERENCE Player is less
critical than other designs in placement selection. Feedback is mostly so low that no special precaution is required. Nevertheless,
position the player as far as you can from the speakers if you want to totally avoid the air coupling between the speakers and the
player.
Locate the Player to provide the most rigid possible connection to the building construction. Solid coupling is essential and the
support used (Rack, Table, Shelf) must be as rigid and solid as possible.

5. POWER CONNECTION

Plug the AC power cord to the back of the EIDOS REFERENCE and in a wall socket. Switch the back power switch to ON. The front
display will light up as soon as you press any key or when pressing the remote control STANDBY button, meaning the unit is now
powered on.
6

Advertisement

Table of Contents
loading

Table of Contents