The guiding principle at Goldmund is to produce a precise sound with the least possible loss of quality through the different stages. Goldmund will never adopt a technology before it is sufficiently developed to satisfy the high quality standards we set.
Page 3
Nevertheless, if the instructions are perfectly carried out, you will notice that the sound quality your Goldmund Epilogue incredibly dynamic, precise and sweet. User Manual – GOLDMUND Epilogue 2 – 3...
PRELIMINARIES The Goldmund Epilogue 2 use some very innovative technology to achieve a level of definition and neutrality never found before in a speaker system. Please read very carefully the following instructions. These high-precision speakers are extremely revealing and can provide the best sound only if they are used properly.
ATTENTION: The pointed feet supporting the front of the Epilogue 2 are very hard. They are designed to go through a carpeted floor. If your floor is made of wood or tile, be careful not to scratch it by moving a speaker without lifting the point. User Manual – GOLDMUND Epilogue 2 – 6...
Use the transparent acrylic small blocks to receive the back of the Epilogue 1. The pointed bar assembled previously on the bottom of the Epilogue 1 must be set in the gliding row engraved on the top silver plate of the Epilogue 2. User Manual – GOLDMUND Epilogue 2 – 7...
In all other cases, you have to remove them before making any connection. If you do not use Goldmund amplifiers, select amplifiers with sufficient speed and dynamic range to do justice to the qualities of the Epilogue. A slow amplifier will not have the capability to properly hold the ultra-fast drivers of the Epilogue.
Page 9
Try using highest quality banana plugs which can be tighten in position. However, it is far better to use the Goldmund Speaker Cable to allow the speed of the amplifier to properly control the drivers. Any speaker cable of lower quality or speed can ruin the sonic capabilities of the Epilogue System.
Page 10
Try using highest quality banana plugs which can be tighten in position. However, it is far better to use the Goldmund Speaker Cable to allow the speed of the amplifier to properly control the drivers. Any speaker cable of lower quality or speed can ruin the sonic capabilities of the Epilogue System.
Page 11
NOTE NOTE NOTE NOTE: : : : When using non-Goldmund speaker cable, the 5-way binding posts may be used for the amplifiers connection instead of the coaxial input. Try using highest quality banana plugs which can be tighten in position.
However, it is far better to use the Goldmund Speaker Cable to allow the speed of the amplifier to properly control the drivers. Any speaker cable of lower quality or speed can ruin the sonic capabilities of the Epilogue System.
Need help?
Do you have a question about the EPILOGUE 2 and is the answer not in the manual?
Questions and answers