Gigabyte GA-M68M-S2P User Manual page 66

Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks block displays
the information about the SATA hard drives that are available for use as RAID array drives. Press <Tab> to
move to the Free Disks block. Select the target hard drives using the up or down arrow key and use the right
arrow key to add the hard drives to the Array Disks block (Figure 5).
RAID Mode : Striping
Free Disks
Port Disk Model
[ESC] Quit
Step 6:
After assigning the RAID drives, press <F7>. A message which says "Clear disk data?" appears (Figure 6).
Press <Y> to confirm or press <N> to cancel. (If the hard drives contain a previously created RAID array, you
need to press <Y> to clear the data in the hard drives.)
RAID Mode : Striping
Free Disks
Port Disk Model
[ESC] Quit
Appendix
MediaShield Utility Nov 20 2006
- Define a New Array -
Capacity
[F6] Back [F7] Finish
MediaShield Utility Nov 20 2006
- Define a New Array -
Capacity
Clear disk data?
[Y] YES
[F6] Back [F7] Finish
Striping Block:
Array Disks
Port
1.0
1.1
[ g ] Add
[ f ] Del
[TAB] Navigate [ hi ] Select
Figure 5
Striping Block:
Array Disk
Port
1.0
[N] NO
1.1
[ g ] Add
[ f ] Del
[TAB] Navigate [ hi ] Select
Figure 6
- 66 -
Optimal
Disk Model Capacity
ST3120026AS 111.79GB
ST3120026AS 111.79GB
[ENTER] Popup
Optimal
Disk Model Capacity
ST3120026AS 111.79GB
ST3120026AS 111.79GB
[ENTER] Popup