Specification - Fujitsu Inverter Halcyon ASU30CLX1 Operating Manual

OPERATING TIPS
Temperature and Humidity Range
Outdoor temperature
Indoor temperature
● If the air conditioner is used under higher temperature conditioner than those listed, the built-in protection circuit may op-
erate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of lower
temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
● Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary dwell-
ings.
● If the unit is used for long periods under high-humidity conditions, condensation may form on the surface of the indoor
unit, and drip onto the fl oor or other objects underneath. (About 80% or more).
● If the outdoor temperature is lower than the temperature scope in the list above, in order to keep safety operation of device,
the outdoor unit may stop operation for certain period of time.

SPECIFICATION

TYPE
MODEL
POWER
COOLING
9315345363_OM.indb Sec1:16 9315345363_OM.indb Sec1:16
Cooling Mode
About 14 to 115 °F
About 64 to 90 °F
COOLING MODEL
INDOOR UNIT
OUTDOOR UNIT
CAPACITY
INPUT POWER
CURRENT
About 14 to 115 °F
About 64 to 90 °F
ASU30CLX1
AOU30CLX1
208/230 V 60 Hz
30,700 Btu/h
3.24 kW
14.2 A
Dry Mode
ASU36CLX1
AOU36CLX1
33,000 Btu/h
3.88 kW
17.0 A
En-16
9/16/2010 2:48:52 PM 9/16/2010 2:48:52 PM