Fujitsu Inverter Halcyon Operating Manual page 15

CLEANING AND CARE
Air Cleaning Filter Installation
1. Open the Intake Grille and remove the Air
fi lters.
2. Attach the air cleaning fi lter to the frame
of the front panel.
● Attach the fi lter on the inside of the tabs (6 places)
so as not to stick out.
Air cleaning fi lter frame
Tabs (6 places)
(In the above fi gure, the intake grille is omitted for
the explanation)
3. Install the 2 Air filters and close the
Intake Grille.
● Don't operate the air conditioner with being opened
the intake grille.
● When air cleaning filters are used, the effect will in-
creased by setting the fan speed to "High" .
Replacing dirty Air cleaning fi lters
Replace fi lters with the following components (purchased
separately).
● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FA16
● Negative air ions deodorizing fi lter: UTR-FA16-2
1. Open the Intake Grille and remove the Air
fi lters.
2. Remove the air cleaning fi lters attached
to the frames of the front panel.
Air cleaning fi lter frame
Air
Cleaning Tabs
Filter (6 places)
Air Cleaning Filter
3. Replace them by 2 new Air cleaning
fi lters.
1 Remove the old air cleaning fi lters in reverse order
of their installation.
2 Install in the same way as for installation of the air
cleaning fi lter set.
4. Install the 2 Air filters and close the
Intake Grille.
● Don't operate the air conditioner with being opened
the intake grille.
About the Air Cleaning Filters
POLYPHENOL CATECHIN AIR CLEANING FILTER (1 sheet)
● The Air Cleaning Filters are disposable fi lters. (They can
not be washed and reused.)
● For storage of the Air Cleaning Filters, use the fi lters as
soon as possible after opening the package.
(The air cleaning effect decreases when the fi lters are
left in the opened package)
● Generally, the fi lters should be exchanged about every
3 months.
Please buy designed air cleaning fi lters (UTR-FA16) (Sold
separately) to exchange the used dirty air cleaning fi lter.
[Negative air ions deodorizing fi lter (1 sheet) — light blue]
● The fi lter should be exchanged about every 3 years so
as to maintain the deodorizing effect.
● Filter frame is not a one-off product.
Please buy designed deodorizing filter (UTR-FA16-2)
(Sold separately) when exchanging the fi lter.
Maintenance of Deodorizing Filters
In order to maintain the deodorizing effect, please clean
the fi lter in the follow way once 3 months.
1 Remove the deodorizing fi lter.
2 Clean with water and dry in the air.
1) Flush the fi lter with high-pressure hot water un-
til the surface of the fi lter is covered with water.
Please fl ush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise
it will damage the deodorizing effect.
2) Rinse with water fl ow.
3) Dry in shade.
3 Reinstall the deodorizing fi lter.
Filter Indicator Reset (A special setting)
Can be used if set correctly during installation.
Please consult authorized serviceman when using this function.
• It lights on when it is time to clean the air fi lters.
Clean the fi lter referring to "CLEANING AND CARE" .
After cleaning, press the MANUAL AUTO button(Fig.2
2 ) for 2 seconds or less on the indoor unit.
● Indicator Lamp
OPERATION
TIMER
ECONOMY
: Flashing : OFF
En-14