Advertisement
Congratulations on your purchase of the SANbox 3050™ Fibre Channel switch. This Quick Start
Guide describes how to install and activate your SANbox 3050 switch using a Windows
workstation.
Prerequisites
• Workstation
• Operating systems:
• Windows NT/2000/2003
• Linux® Red Hat® 7.2
• Solaris® 2.8/2.9 CDE
• 256 MB memory
• 156 MB disk space
• 300 MHz processor
• Video card with 256 colors
• CD ROM drive, RS 232 serial port, RJ-45 Ethernet port
• Crossover cable to connect the workstation and the switch
• IP address, subnet mask, and gateway to assign to the switch
Switch Installation Procedure
Step 1. Verify the Package Contents
Step 2. Mount the Switch
Step 3. Install SFPs
Step 4. Apply Power to the Switch
Step 5. Install the SANbox Manager Application
Quick Start Guide
1
Advertisement
