Download Print this page
Pullman Holt 102ASB-12PD Operation & Care Instructions

Pullman Holt 102ASB-12PD Operation & Care Instructions

Dry asbestos vacuum cleaner

Advertisement

Quick Links

Dry Asbestos Vacuum Cleaner
This vacuum cleaner is a high quality, precision made product. All
parts used in the manufacturing of this vacuum cleaner have passed
rigid quality control standards prior to assembly and an "each unit"
final inspection prior to packaging is your assurance of proper
assembly. This vacuum cleaner was protectively packed to prevent
possible damage in transit. Should damage occur, please notify the
transporting carrier immediately for loss and/or claim.
Rear Wheel
B703544 (2)
Operation & Care Instructions
Save For Future Reference
HARDWARE PACKAGE
B910518 (2)
Caster
Washer
B980556 (2)
Hub Cap
B910073 (4)
Hub Cap Cover
B703549 (2)

Advertisement

loading

Summary of Contents for Pullman Holt 102ASB-12PD

  • Page 1 Operation & Care Instructions Save For Future Reference Dry Asbestos Vacuum Cleaner This vacuum cleaner is a high quality, precision made product. All parts used in the manufacturing of this vacuum cleaner have passed rigid quality control standards prior to assembly and an “each unit” final inspection prior to packaging is your assurance of proper assembly.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANTES MESURES DE SÉCURITÉ L’utilisation d’un appareil électrique demande certaines précau- When using an electrical appliance, basic precautions should tions: always be followed, including the following:. LIRE TOUTES LES INSTRUCTIONS AVANT DE READ ALL INSTRUCTIONS FAIRE FONCTIONNER CET APPA R E I L BEFORE USING THIS VACUUM CLEANER AVERTISSEMENT: WARNING...
  • Page 3: Grounding Instructions

    GROUNDING INSTRUCTIONS INSTRUCTIONS VISANT LA MISE À LA T E R R E This appliance must be grounded. If it should malfunction or Cet appareil doit être mis à la terre. En cas de défaillance ou de breakdown, grounding provides a path of least resistance for elec- panne éventuelles, la mise à...
  • Page 4: Limited Warranty

    ABOUT THE VACUUM CLEANER Handle Assembly Guide: 1. Remove and carefully set aside motor head and HEPA fi lter. 2. Remove the .250-20x1.25 hex bolt and .250-20 hex nut from the bottom handle support. 3. Loosen the hex nuts that secure the clamps on the tank. Slide handle through the two clamps mounted on the tank and onto the handle support.