Operation With Direct Cable Via Loop Out - Zenith PVR4664 Operating Manual & Warranty

PIP OPERA TION
OPERATION WITH DIRECT CABLE VIA LOOP OUT
With your equipment setup in this manner, your television has
the following PIP capabilities:
• Simultaneously view a video tape playing in the VCR and
a basic cable channel selected by the TV's tuner.
• Simultaneously view two different channels; one basic
cable channel selected by the TV's tuner and a second ba-
sic cable channel selected by the VCR's tuner.
• Swap the main picture and the PIP inset.
NOTE:
• The cable channels you can view depends on the service
you have purchased from your cable company.
PIP VIEWING OPTIONS
Viewing Two Different
Cable Channels
Select Ant/Cable 2 as the
Main Source in the Source
Menu.
• Select Video 1 as the PIP
Source in the Source Menu.
• Select a channel with the
TV's channel selector.
• Press PIP key to activate PIP.
• Set VCR's "I%qVCR* switch
to TV,
• Select a PIP channel using the
tuner in the VCR.
Viewing a Video Tape
and a Cable Channel
Select Ant/Cable 2 as the
Main Source in the Source
Menu.
Select Video ILas the PIP
Source in the Source Menu.
Select a channel with the
TV's channel selector.
Press PIP key to activate PIP.
Set VCR's TV/VCR* switch
to TV.
Play a tape in the VCR and
view it in the ?IP inset.
(Make sure VCR's TV/VCR*
switch is still :set to TV.)
* May be labeled TV/Video.
STEREOVCR
Cable TV
Wall Jack
PIP Inset Source
Connected to the Video 1 In jacks.
L00P 0UT ANTENNA
r00E¢00[R
VlOEO
I
!
Main Picture Sou rce
Connected to the Antenna/Cable 2 jiack.
STARSIGHT
,"ANTENNA
CABLE ,' CABLE
.o,"
tOOP OUT
Option 2: Direct Cable Connection via Loop Out To VCR.
(Optional cables are not supplied with television.)
2_36-o 10 -- 3