Table of Contents
Advertisement
REMOTE
CONTROL
MBR3455
I
AUTO
FIND
OPTION
If you have tried all the codes listed for your brand and type of
product in the code table, and none of those codes operate your
e_luipment, you can use Auto Find to search for the code you need.
Follow these steps for each product you are using:
1. Turn the product
ON and aim the remote toward it.
2.
Press and hold PRG with a small blunt object until
the indicator
lights (about three seconds).
3.
Press the mode key on the remote for the product
you want to control:
TV, VCR, CABLE,
or AUX.
4.
Key in "000",
then press ENTER
within two sec-
onds. When the indicator
light flashes three times
and remains
lit, Auto Find is active.
5. Press and hold POWER, then release it, repeating
this action about once _L second until the product
turns OFF.
,
Press
ENTER
immediately
to save
the code.
If your
remote
fails to operate
the functions
you use most
often,
yo_ can re-enter
Auto Find
and .,;catch for a
better
code.
NOTES:
•
The indicator
light should t'lash OFF when you press
POWER
and back ON when you release it. If the indicator
light stays on when you press POWER,
Auto Find has tried
all available
codes. If you finish Auto Find and the product
you want to control has not turned off, your _cemote cannot
control that product.
•
Pressing
PRG at any time during the use of Auto Find will
cancel Auto Find, and you wi [1have to start again.
ON
POWER
I1_
OFF
Equipment to be
controlled
Typical Remote
Control
2_16-o
3 --5
Advertisement
Table of Contents
