Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the 'IV tuner to match your antennaor
cable-TV system.
If you used the AUTO CH. SEARCH feature, the proper
BAND was set automaticallyfor yourTV. If you did not use
AUTO CH. SEARCH, or you are having difficulty tuning
channels, the TUNING BAND may have to be set manually
to match yourviewing needs.
BeforeUsing TUNING BAND
Connect and turn ON all external equipment, such as a
cable-TV decoder, VCR, etc. Use CH. AUTO SEARCH,
if not previouslyused.
NOTE: TUNING BAND can only be used with ANT/
CABLE I or 2 Source selection.
To Use TUNING BAND
1. TUNING BAND should be selected if you followed
the "Basic Menu Operation" given in the "On-
Screen Menu" section.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CI"L LABELS
"> TUNING BAND
AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
CABLE-CATV
Selecting
Tuning
Band
2.
Press ADJUST (ADJ) Left/Right
to select the
desired tuning baud, as shown below:
•
BROADCAST
is used for standard over-the-alr
broadcasts.
•
Cable - CATV is used for most standard cable-TV
(CATV) systems.
•
Cable - HRC is used for cable-TV systems that use
HRC (Harmonically Related Carrier).
•
Cable - ICC is used for cable-TV systems using ICC
(Incremental Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable
tuning bands are shown below:.
BROADCAST Band
VHF 2 to 13
UHF 14 to 69*
*
Channels above 69 are not selectable.
CATV, HRC and ICC Bands
1 to 125"*
** Channels above 125 are not sele£table.
When Some Channels Are Not Clear
If some channels are not dear, change the AUTO FINE
TUNE. You may have to try different TUNING
BAND and
AUTO FINE TUNE combinations
until you get a clear pic-
ture, channel-to-channel.
Refer to the AUTO FINE TUNE
option for details.
AUTO FINE TUNE
Purpose
Lets your TV compensate
for variations in broadcast agd
cable-TV frequencies.
ff you are having difficulty tuning channels, the AUTO
FINE TUNE may have to be set manually to match your
viewing needs.
Before Using AUTO FINE TUNE
Connect and turn ON all external equipment,
such as cable-
TV decoder, VCR, etc.
SETUP MENU
AUTO CH. SEARCH
CH. ADD/DEL
CH. LABELS
TUNING BAND
"> AUTO FINE TUNE
CLOCK SET
CAPTIONS
CH. BACKGROUND
FIXED
Selecting Auto Fine Tune
NOTE: AUTO FINE TUNE can only be used with ANTI
CABLE 1 or 2 Source selection.
To Use AUTO FINE TUNE
1.
AUTO
FINE TUNE
should be selected
if you fol-
lowed
the "Basic
Menu
Operation"
given in the
"On-Screen
Menu"
section.
2.
Press
ADJUST
(ADJ)
Left/Right
to select
the
desired mode of operation,
as follows.
•
FIXED is used to receive "over-the-air"
TV stations,
and with many cable-TV systems.
•
SEARCH
is used only when the TV must search to
lind the frequency being received, such as when used
with certain VCRs and video game controllers.
When Some Channels Are Not Clear
If some channels are not dear, change the TUNING
BAND. You may have to try different AUTO FINE TUNE
and TUNING BAND settings until you get a consistently
clear picture, channel-to-channel.
Refer to the TUNING
BAND option for details.
2s80
8-3
Advertisement
Table of Contents
