Table of Contents
Advertisement
MAINTENANCE
AND TROUBLESHOOTING
VCR MODE CHART
1. OUTPUT
TO TV FROM ANTENNA
OUT JACK ON VCR
ANTENNA
OR CABLE-TV
INPUT TO VCR
START)
HERE
VCR POWER
__
VCR POWER
IS OFF
_,,_ATUS
_--_
IS ON
_VCR
POWER/;
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
STEREO
AUDIO
IF "IV IS
CAPABLE
SWITCH IN TV
POSITION
t
The operatingmode of yourVCR determineswhat type of
a program source is provided, andwhether the audio is
stereo or monaural.Use this flow chart to determine the
operating status of yourVCR, so that you can select the
proper viewing source and channel on your"IV.Select the
VCR outputchannel (3 or 4) on yourTV to view tapes or to
see programsselected by using the channel tuner in the
VCR.
During tape playback, we recommend
you use the AUDIO
and VIDEO output jacks on your VCR for improved per-
formance.
SWITCH IN VCR
POSITION
TV/VCR switch may be
marked W/VIDEO
on some VCR=.
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF "IV IS
CAPABLE
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON "IV
CHAN 3/4
NO
YES
't
VIDEO TAPE
PROVIDES
PROGRAM
TO
BE SEEN ON TV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MONAURAL
AUDIO
ONLY
VCR ANTENNA
OUTPUT TO "IV
VCRMOD_I
12 -- 3
Advertisement
Table of Contents
