Zenith SL3583ST8 Operating Manual & Warranty page 40

MAINTENANCE AND TROUBLESHOOTING
VCR MODE CHART 2. OUTPUT TO TV FROM AUDIO/VIDEO JACKS ON VCR
The operating mode of your VCR determines what type of
programsource is provided, a ndwhetherthe audio is stereo
or monaural Use this flow chart to determine the operating
status ofyourVCR, so thatyou knowwhen to select the VCR
(or au_liary) source on yourTV.
Use the LEFT and RIGHT AUDIO output jacks on the
VCR to get stereo sound. Select STEREO audio mode of
operation for the TV by using the options on the AUDIO
HERE Menu of the TV. You must use the VIDEO output when
the LEFT and RIGHT AUDIO outputs are used.
VCR POWER VCR POWER
IS OFF IS ON
NO OUTPUT IS
PROVIDED AT THE
AUDIO AND VIDEO
OUTPUT JACKS
@@@
VIDEO R L
OUT AUDIO
J OUT
Sta=_o VCR output to "IV
NO YES
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON YV
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON TV
1. TV channel or tape playback is provided at the video
output jack.
2. Stereo audio is provided at the audio output jacks if
stereo I1 present on the channel being received or on
the tape being played.
©
VIDEO
OUT
t
©©
R L
AUDIO
OUT J
Stereo VCR output to TV
VCP.MODO 12 -- 4