Table of Contents
Advertisement
SETUP MENU
TUNING
BAND
Purpose
Allows for setting the TV channel selector (tuner) to match
your antenna or cable-TV system.
If you are having difficulty tuning channels, the TUNING
BAND may have to be set manually to match your viewing
needs.
SETUP
MENU
AUTO PROGRAM
CH. ADD/DEL
-> TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
AUDIO
CABLE-CATV
Selecting Tuning Band
To Use TUNING BAND
Press ADJUST (ADJ) Left/Right to select the tuning band that
gives you the most channels:
•
BROADCAST--
is used for standard "over-the-air" broad-
casts.
•
CABLE -- CATV is used for most standard cable-TV
(CATV) systems.
•
CABLE _ HRC is used for cable-TV systems that use HRC
(Harmonically Related Carrier).
•
CABLE m ICC is used for cable-TV systems using ICC
(Incremental Coherent Carrier).
Available Channels per Band
The channels that are available in the broadcast and cable tun-
ing bands are shown below:
BROADCAST Band m VHF 2 to 13, UHF 14 to 69
CATV, HRC and ICC Bands -- 1 to 125
AUTO TUNING
Purpose
Lets your TV compensate for variations in broadcast and
cable-TV frequencies.
SETUP
MENU
AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
-_ AUTO TUNING
CLOCK SET
CAPTIONS
AUDIO
FIXED
If you are having difficulty tuning channels, the AUTO TUN-
ING may have to be set manually to match your viewing
needs.
To Use AUTO TUNING
Press ADJUST (ADJ) Left/Right to select the mode of opera-
tion that gives you the most channels:
•
FIXED is used to receive "over-the-air"
TV stations, and
with many cable-TV systems.
•
SEARCH is used only when the TV must search to fred the
frequency being received, such as when used with certain
cable-TV systems, VCRs and video game controllers.
Selecting Auto Tuning
CLOCK SET
Purpose
Sets the clock in the TV to the correct time.
SETUP
MENU
AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
-_ CLOCK SET
CAPTIONS
AUDIO
10:30
Selecting
Clock Set
To Use CLOCK SET from Remote Control
Use the numbered buttons on the remote control to enter the
correct time. Press ENTER (ENT) to start the clock.
To Use CLOCK SET from Control Panel
Use ADJUST (ADJ) Left/Right to advance the clock. Press
ENTER (ENT) to start the clock.
CH 13
10:56
STEREO
Channel/Time Display"
2735-0
7 _ 2
Advertisement
Table of Contents
