The First Time You Operate Your Tv; Step 1. Connect The Power; Step 2. Use Auto Program; Step 3. Set The Clock - Zenith SENTRY 2 SMS1943S Operating Manual & Warranty

THE FIRST TIME YOU OPERATE YOUR TV
STEP 1. CONNECT THE POWER
A.Plug your TV into an unswitched AC power source.
B.Turn the TV on by pressing OFF-ON.
Do not plug TV into switched outlet on a
VCR or cable-TV decoder
STEP 2. USE AUTO PROGRAM
When your TV is first powered up you will see the AUTO
PROGRAM reminder display. AUTO PROGRAM finds all
available channels and stores them in the memory of the TV.
To activate AUTO PROGRAM, press ADJUST (ADJ)
Left/Right.
SETUP MENU---
-> AUTO PROGRAM
CH. ADDIDEL
TUNING BAND
AUTO TUNING
CLOCK SET
CAPTIONS
AUDIO
START
Setup Menu with Auto Program Highlighted
DETERMINING TUNING BAND
J
Determining Tuning Band
TUNING BAND IS
CH [-"] IS FOUND
Searching for Channels-
AUTO PROGRAM HAS COMPLETEI
TUNING BAND IS
_ CHANNELS FOUND
Search is Completed
S
CH 13
STEREO
Normal Operation
J
STEP 3. SET THE CLOCK
1. Press MENU repeatedly until the SETUP MENU is
shown.
2. Press SELECT (SEL) to highlight CLOCK SET.
3. Use numbered buttons on remote control to enter cor-
rect time or use ADJUST (ADJ) Left/Right to advance
the clock.
4. Press ENTER (ENT) to start the clock and return to
normal viewing.
SETUP MENU
AUTO PROGRAM
CH. ADD/DEL
TUNING BAND
AUTO TUNING
-> CLOCK SET
CAPTIONS
AUDIO
10:30
Setup Menu with Clock Set Highlighted
STEP 4. USE OTHER OPTIONS
You may want to consider using the following options:
• Program the channels accessed by using CHANNEL (CH)
Up/Down. Refer to the CH. (Channel) ADD/DEL option for
details.
• Turn on Closed Captions using the CAPTIONS option.
273_o 2 -- 1