Worx WG203 Owner's Manual page 8

O8
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Always ensure the hand guard supplied
is fitted before using the Hedge trimmer.
Never attempt to use an incomplete
machine or one fitted with an unauthorized
modification.
Check cutting blades regularly for damage,
and if damaged repair immediately.
Keep cable away from the cutting area;
check the cable for damage before starting
work.
Do not start the Hedge trimmer with the
blade cover fitted.
Take care notto overload the Hedge trimmer
and do not use it on jobs for which it is not
intended, i.e. you are allowed to use the
Hedge trimmer only to cut hedges, shrubs
and perennials.
Always be sure of your footing when taking
steps steps and when using your hedge
trimmer.
Never run when using your hedge
trimmer.
Heavy duty gloves should always be worn
when using the Hedge trimmer.
During adjustment, be careful not to place
your fingers between moving blades and
fixed parts of the machine.
During transportation and storage of the
Hedge trimmer, keep the blades covered at
all times with the blade cover.
The use of a Residual Current Device
(R.C.D.) with a tripping current of not more
than 30mA is recommended.
Do not try to grasp or remove hedge
clippings when the hedge trimmer is
running. Only remove hedge clippings
when the appliance is switched off and
disconnected from the electric supply.
Carry the hedgetrimmer atthe handle while
the cutter blade is not running. Always
ensure guard supplied is fitted when
transporting or storing the hedge trimmer.
Careful operation reduces the injury by the
cutter blade.
25. Keep cable away from the cutting area. Be
aware that during operation the cable may
be covered in hedge clippings and could be
cut inadvertently.
SYMBOLS
©
_ Warning
@
®
Read the instructions
Wear eye protection
To avoid possibility of electric
shock, do not expose to rain
Remove plug from the electric
supply immediately if cable is
damaged or cut
CTC-WG202WG203-M-060609.indd 8 2006-6-9 17:03:45