Advertisement
2. Clear CMOS Jumper: CLS_CMOS
You can clear CMOS to restore default system setting. To clear the CMOS, follow
the procedures described below.
1. Turn off the AC power supply and connect pin 1 and 2 together using the jumper
cap .
2. Return the jumper setting to normal (pin2 and 3 together with the jumper cap).
3. Turn the AC power supply back on.
3. FSB100 MHz CPU Selection Jumper: J8
This jumper is used to select FSB100MHz K7 CPU. The default state for J8 is
OPEN. When you want to use FSB100 MHz K7 CPU, set this jumper as CLOSE.
1
1
1
1
4
Clear CMOS
Normal (Default)
CLS_CMOS
Open
(Default)
Close for
FSB100MHz CPU
J8
Advertisement
