Starting Up For The First Time; Powering Off The Computer; Using The Os Shut Down Function; Using The Dual Function Power Switch - Foxconn 661FX7MF series User Manual

Hide thumbs

Table Of Contents

Table of Contents

1. After making all the connections, replace the system case cover.

2. Be sure that all switches are off.

3. Turn on the devices in the following order.

Monitor

External SCSI devices (starting with the last device on the chain)

System power

4. After applying power Led on the system front panel case lights up. For ATX

power supplies, the system LED lights up when you press the ATX power

switch. If your monitor complies with green standards or if it has a power

standby feature, the monitor LED may light up or switch between orange

and green after the system LED turns on. The system then runs the power-

on tests. While the tests are running, the BIOS beeps or additional mes

sages appear on the screen. If you do not see anything within 30 seconds

from the time you turned on the power, the system may have failed a

power-on test. Check the jumper settings and connections or call your

retailer for assistance.

5. At power on, hold down <Delete> to enter BIOS Setup. Follow the instruc-

tions in Chapter 3.

1. Using the OS shut down function

If you use windows 98/ME/2000/XP, click the Start button, click Shut Down,

then click the OK button to shut down the computer. The power supply should

turn off after Windows shuts down.

2.Using the dual function power switch

While the system is ON, pressing the power switch for less than 4 sec-

onds puts the system to sleep mode or to soft-off mode, depending on the

BIOS setting. Pressing the power switch for more than 4 seconds lets the

system enter the soft-off mode regardless of the BIOS setting.

661FX7MF/648FX7MF/648C7MF Series User Manual

Chapter 2