Foxconn 945P7AA series User Manual page 54

Chapter 3 BIOS Description
PWRON After PWR-Fail (Default: Off)
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status),On (auto power on) and Former-Sts (resume with
the previous status).
Power Management Events
Press <Enter> to set the items of power management events. Please
refer to page 49.
Primary IDE 0/1, Secondary IDE 0/1 (Default: Disabled)
When these items are enabled, the system will restart the power saving timeout
counters when any activity is detected on any of the drives or devices on the
primary or secondary IDE channels. The setting values are Disabled and Enabled.
FDD, COM, LPT Port (Default: Disabled)
When this item is enabled, the system will restart the power saving timeout
counters when any activity is detected on the floppy disk drive, serial port, or
the parallel port.
PCI PIRQ[A-D]# (Default: Disabled)
When this option is disabled, any PCI device set as the Master will not power
on the system.
48