Selecting Probes
For standard operation, use the red test lead on input
lead on COM
test leads or probes, you must change the probe settings accordingly.
Open the main
1
2
3
Select the type of probe you are going to use
on input 1. For all applications in the
Applications Guide, you must use test leads.
4
TEST LEADS
(for example)
Accept the probe settings for
5
input 1. The screen closes.
Select
6
Select the sensitivity of the current probe you are going to use on input 2.
For all applications in the Applications Guide, use the i-400s current probe and
choose 1 mV/A.
and the current clamp on input
.
MENU
INSTRUMENT SETUP
PROBES
again.
PROBES
Introducing the Fluke 43B
Instrument Setup
. If you are using other
1
, the black test
17