Troubleshooting; Assistance Or Service; Requesting - Whirlpool RF386PXGZ1 Use & Care Manual

TROUBLESHOOTING
Most cooking problems often are caused by little things you can find and fix without tools of any
kind. Check the lists below and on the next page before calling for assistance or service. If you
still need help, see "Requesting Assistance or Service" on page 38.
PROBLEM CAUSE
Nothing works • The range is not plugged into a properly grounded live outlet with the proper
voltage. (See Installation Instructions.)
• You have blown a household fuse or tripped a circuit breaker.
• The control knob is not set correctly. Push in the control knobs before
turning them.
The oven does not work • You have not set the electronic control correctly. Refer to setting the elec-
tronic oven control section. (See pages 14-22.)
The surface cooking • You have blown a household fuse or tripped a circuit breaker.
areas will not work • The coil elements are not plugged in all the way (Models RF385PXG and
RF387LXH). (See "Replacing" on pages 31 and 32.)
• You have not set the control knobs correctly. Push the control knobs in
before turning them to a setting.
Cannot boil on left front • Turn the ACCUSIMMER knob to NORMAL BURNER position.
element/ACCUSIMMEFM • Turn left front control knob to HI for a rapid boil.
feature
ACCUSIMMER will not • Turn left front control knob on, along with the ACCUSIMMER knob.
simmer
ACCUSIMMER element • Turn left front control knob to Max, along with turning the ACCUSIMMER
does not get hot enough knob on.
36