Festool MFS Multi-Routing Template System User Manual page 36

bushing (male). Second set: 1/2" bit / 1 1/4" bushing (female) and 1/4" bit / 1/2" bushing (male). The
examples given are only a few of the possible bit/ring combinations commonly available.
I want to fit a router into this piece of MDF to act as a makeshift router table I can set between two
saw horses on the job site. This is the plate I'll be recessing into the MDF. Fitting the plate is a two-
step process, making a cutout for the router to pass through and a recessed lip or rebate for the plate
to sit on. First thing is to measure the plate and the radius of its corners to set the MFS on, and to
choose the right diameter bit to match the corners.
© 2008-2009, Brice Burrell Page 36