Whirlpool GUI500XTKQ0 Use & Care Manual page 13

Normal
Use this cycle for loads
with normal amounts of
food soil. (The energy-
usage label is based on
this cycle.) Use both detergent
Initial display time after dispenser sections.
rotating clock pattern:
82-90 min
Rinse Rinse Final Dry Time
Heated (min)
Rinse
Wash Main Water
Wash Usage
(gal/L)
• • • • •
87* 6.9-10.1/
140°F 140°F Light 26.2-38.2
(60°0) (6O°C) soil
X I_'__i ® _
Anytime during a cycle, press
Cancel
Drain
The display shows
China Crystal
Use this cycle for china
and crystal. This cycle
uses a light wash and
gentle dry. During the
heated dry, the heating Use main detergent
element cycles on and dispenser section.
off.
Initial display time after
rotating clock pattern:
65-73 min
Rinse Rinse Final Dry Time
or Purge Heated (min)
Rinse
Wash Main Water
Wash Usage
(gal/L)
• • • • 70* 5.5-8.6/
135°F cycled 20.8-32.6
(57°0)
Quick Wash
Use this cycle for pre-
rinsed or lightly-soiled
loads. This cycle
automatically adds a fill
and brief pre-wash,
purging the hot water line
and improving wash
results, without adding
time for water heating
periods.
Initial display time after
rotating clock pattern:
42-46 min
Main Rinse Rinse Final
Wash Heated
Rinse
Use main detergent
dispenser section.
First Fill Wash Dry Time Water
Water (min) Usage
Temp. (gal/L)
Greater • • • • 48* 5.2-6.7/
than 19.7-25.4
135°F
(57oc)
Less • • • • • 44* 6.9-8.4/
than 26.1-31.8
135°F
!57°C)
Use this rinse cycle for
rinsing dishes, glasses,
and silverware that will
not be washed right
away. Do not use detergent
Rinse Only Initial display time after with this cycle.
rotating clock pattern:
4 min
Wash Main Rinse Rinse Final Dry Time Water
Wash Heated (rain) Usage
Rinse (gal/L)
• 10 1.8-2.1/
6.8-7.9
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE: If your dishwasher does not need draining, the light turns
off. Select a new cycle and options.
To stop the drain
You can press Cancel/Drain again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To clear the indicators
Press Cancel/Drain before starting the dishwasher to clear all
options and cycles.
During the first fill of a cycle
1. Press a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
After the first fill of a cycle
1. Press
©
Cancel
Drain
The display shows
Your dishwasher starts a 2-minute drain (if needed). Let the
dishwasher drain completely. The light turns off after 2
minutes.
NOTE: If your dishwasher does not need draining, the light
turns off.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. Close the door.
4. Press a new cycle and/or options.
13