Table of Contents
Advertisement
10. It is recommended that you select the shortest time option on the menu, for placing the camera
into standby during periods of inactivity. This will conserve battery power and reduce the heat
given off by the LCD screen, which can contribute to condensation inside the housing and
fogging.
11. It is strongly recommended to take the first dive without the camera inside the housing. You
should check that the water tight seal has not been affected during transport and long periods
of storage.
12. It is likewise recommended to visually monitor the housing during every descent, especially
for the first 10 meters/33 ft. If water is observed entering the housing or bubbles escaping
from it, the housing should be rotated to a port down position and held that way as you return
to the surface immediately and get out of the water.
21
Advertisement
Table of Contents
