Table of Contents
Advertisement
CAMERA STANDBY MODE
You can access the camera's menu to select the length of the inactivity period. Inactivity period is the length
of time before the camera goes into standby mode. Options are 30 seconds, one minute, five minutes, and 30
minutes. This feature allows you to conserve battery power by placing the LCD monitor on standby [sleep
mode]. It is recommended that this option is set for 30 seconds to conserve battery power. If set for longer
periods of time the LCD screen will heat up and that will produce condensation and fogging of the lens port.
Condensation on the lens port will have a negative impact on the quality of the images taken.
When you want to resume shooting, pressing the shutter release half-way will re-activate the camera.
However, if after the camera goes into standby, a further period of three minutes goes by without any
activity, the camera will turn off [deep sleep mode]. You can turn it back on by pressing the On/Off
Power button. The Welcome to Nikon Coolpix screen will appear then it will display last image taken.
19
Advertisement
Table of Contents
