Fantasea EyeDaptor G Series‐F67
The EyeDaptor G Series‐F67 enables mounting
accessory lenses and filters with a 67mm thread
mount on the Canon G11, G10, G9* and G7*
housings (WP‐DC34, WP‐DC28, WP‐DC21 and
WP‐DC11 respectively).
* Additional adaptor required for the Canon G9 and G7 housings: EyeDaptor G9‐G10 (Cat. No. 4703).
Please refer to the EyeDaptor G9‐G10 instruction manual for further information.
Mounting a Lens Accessory with a 67mm Thread Mount on the Canon G11/G10
Housings
1. Please use the utmost care and do not use excessive force when assembling and
disassembling the different lens accessories, in order not to cause any damage to
the products.
2. Attach the secure line to the adaptor and the housing, in order to secure the lens
and adaptor to the housing.
3. Install the EyeDaptor G Series‐F67 by attaching it to the housing lens port. First hold
it in your hand so the threaded side of the adaptor is facing away from the camera
housing and the adaptor is aligned with the housing lens port (image A). Next, Place
the adaptor over the housing lens port and follow by securing the two adaptor lanyards
to the two corresponding housing secure line loops (image B). Please note that the
lanyards are essential in order to keep the adaptor in place.
Image A
Instruction Manual
EyeDaptor G Series-F67 Instruction Manual
(Cat. No. 4701)
Image B