Extreme Networks EPICenter 7.1 Getting Started Manual page 29

■
The HTTP port that the EPICenter client uses to communicate with the
server (the default is 8080). This is the HTTP port you entered when
you installed the EPICenter server.
To launch the EPICenter client, do the following:
1 Launch your web browser.
2 Enter the URL for your EPICenter server, in the form:
http://< host >:< port >/
Replace < host > with the name or IP address of the system where the
EPICenter server is running. Note that if this is the local system, do not
specify localhost for the < host >.
Replace < port > with the TCP port number that you assigned to the
EPICenter web server during installation.
Launching EPICenter
NOTE: If you configured your EPICenter server to use the
default web server port 80, you do not need to include the
port number. However, the port used by EPICenter is 8080
by default, so in most cases you do need to include the port.
29