Specifications; Model Numbers; Engine; Fuel System - Exmark METRO Operator's Manual

2. SPECIFICATIONS

2.1 MODEL NUMBER:
Serial Nos. 320,000-369,999:
Serial Nos. 370,000 & Higher: M3213KA; M3613KA; M3615KC; M4815KC; M3613KAC;

2.2 ENGINE

2.2.1 Engine Specifications: See your engine owner's manual.
2.2.2 RPM (No Load): 3600 rpm

2.3 FUEL SYSTEM

2.3.1 Capacity: 5 gal. (18.9 liter)
2.3.2 Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the pump
sticker octane rating of 87 or higher. In countries using the research method, it
should be 90 octane minimum.
2.3.3 Fuel Filter: Replaceable in-line
2.3.4 Fuel Shut Off Valve: in-line, 1/4 turn

2.4 SAFETY INTERLOCK SYSTEM

Operator must have the transmission in neutral and PTO disengaged to start engine.
Release of Operator Presence Control (OPC) levers will cause engine to stop if
transmission is not in neutral and/or PTO is engaged.

2.5 STEERING/BRAKE CONTROL

Fingertip drive control levers provide independent control of traction, braking, and neutral
to each drive wheel for moving, stopping, and power turning. Parking brakes are engaged
by locking drive control levers in the "brake" position.

2.6 TRANSMISSION

2.6.1 Peerless 700-070A, five speeds forward and one reverse.
2.6.2 Speed range:
1st 2.0 mph (3.22 km/h)
2nd 2.7 mph (4.35 km/h)
3rd 3.5 mph (5.63 km/h)

2.7 WHEEL DRIVE SYSTEM

Banded double A-Section V-belts, single top-side idlers and replaceable bolt-on drive
sheaves and brake drums. (Single B-Section V-belts for the 32" Model)

2.8 TIRES

Deck Size
Size
Quantity
Tread
Ply Rating
Pressure
Bearings Replaceable Ball Replaceable Ball Replaceable Roller
M3213KA; M3613KA; M3615KC; M3615KA; M4815KC;
M4815KA; M3213KAC; M3613KAC; M3615KCC;
M3615KAC; M4815KAC; M4815KCC
M4815KAC
4th
5th
Rev 3.1 mph (4.99 km/h)
Drive
Pneumatic (Air-Filled)
32" 36" & 48"
13 x 5.0-6 13 x 6.5-6
2
Turf Saver Turf Master
4
14 psi (97 kPa) 14 psi (97 kPa)
- 9 -
4.1 mph (6.60 km/h)
6.2 mph (9.98 km/h)
Front Caster
Semi-Pneumatic
All Decks
9 x 3.50-4
2 2
Smooth
4