Advertisement
•
Holdbaghandle andbagclipwhileemptying t he
contents.
•
Compress b agopening andfoldinnerflapover
opening.
•
Foldouterflapoverinner flapandinsert b uttons on
thebagthrough metal o utlets.
Twist t hebuttons t o lockbag.
3u_ons
Bag
Inner Flap
J
Outer Flap_
Bag Handle
Figure 7
ToRemove BlowerChute
•
Grasp blower chute with one hand and pull lock rod
on mounting bracket with other hand toward engine
to release. Refer to Figure 5.
•
Remove blower chute from rim of the discharge
opening.
Usingthe NozzleVacuum
•
Place nozzle/hose vac handle in the top position on
the nozzle to vacuum through nozzle. See Figure 8.
•
The spring loaded pin must be in the first hole of the
hose adapter to operate the nozzle vac.
•
Place both hands on top of upper handle to push
unit over yard waste.
Yard waste such as leaves and pine needles can be
vacuumed up through the nozzle for shredding. After
material has been shredded by the flail blades on the
impeller assembly, it will be discharged into catcher bag
or through blower chute. Do not attempt to shred or chip
any material other than vegetation found in a normal
yard (i.e. branches, leaves, twigs, etc.) Avoid fibrous
plants such as tomato vines until they are thoroughly
dried out. Materials such as stalks or heavy branches
up to 1 1/2" in diameter may be fed into the chipper
chute.
Nozzle/Hose
Vac Handle
(Top Position)
Spring Loaded Pin
(First Hole)
Figure 8
IMPORTANT: The flail screen is located inside the
housing in the discharge area. If the flail screen
becomes clogged, remove and clean as instructed in
SECTION 5: MAINTAINING YOUR YARD VACUUM.
For best performance, it is also important to keep the
chipper blade sharp.
WARNING: Do not at any time make any
adjustments without first stopping engine
and disconnecting spark plug wire.
Using the HoseAssembly
•
Place nozzle/hose vac handle in the bottom
position on the nozzle to redirect vacuum to the
hose assembly. See Figure 9.
•
The spring loaded pin must be in the second hole of
the hose adapter to operate the hose assembly.
•
Unhook the hose from upper handle bracket and
grasp the hose handle to guide while vacuuming
yard waste such as leaves or pine needles in hard
to reach places.
Nozzle/Hose
Vac Handle
(Bottom Position)
/
Spring
Loaded
Pin
(Second Hole)
Figure 9
Advertisement
