Advertisement
NozzleHeightAdjustment
The nozzle can be adjusted to any six positions,
ranging from 5/8" to 4 1/8" ground clearance. The
nozzle height has to be adjusted according to the
conditions. Move the height adjustment levers forward
or backward to adjust the nozzle upwards or
downwards. See Figure 10.
NOTE: In general, raise the nozzle height to vacuum a
thick layer of lea ves or to operate with the blower chute
and lower the nozzle height for smoother surfaces.
Nozzle j
Figure 10
Nozzle Height
Adjustment
Lever
SECTION 5: MAINTAINING YOUR YARD VACUUM
Customer R esponsibilities
o.o,oO.- J!
MAINTENANCE
SERVICE
SCHEDULE
_o,O
_o_
&o_
e_
._e
_o
DATES
t-
Lubricate Wheels
O
Lubricate Nozzle Levers
D
O
Lubricate Locking Rod
Q_
Lubricate Nozzle/Hose Handle
Check Chipper Blade
Change Oil
Check Air Filter
Z
Clean Engine
Check Spark Plug
WARNING:
Always
stop
engine
and
disconnect
spark
plug
wire
before
cleaning, lubricating or doing any kind of
maintenance on your machine.
Lubrication
Wheels: Lubricate each wheel shoulder screw once a
season with light oil. Refer to Figure 6.
Nozzle height adjustment
levers: Lubricate the pivot
points of the nozzle height adjustment levers once a
season with light oil. Refer to Figure 6.
Locking Rod: Lubricate the locking rod with light oil to
ease the application of attaching on or removing bag or
blower chute. Refer to Figure 6.
Nozzle/Hose
Vac Handle: Lubricate the nozzle/hose
vac handle on top of nozzle once a season with light oil.
Refer to Figure 6.
Engine: Follow the separate engine manual packed
with you unit for lubrication instructions.
10
Advertisement
